KWR90 series sensor can accurately output values by measuring forces and moments in six different directions (X, Y, Z, Mx, My, Mz)，The compact housing is dust-proof and water-resistant. It includes embedded electronics, temperature sensors and provides an mounting flange.The sensor is available with the communication options like Modbus and Serial (RS422 , RS485) and so on

KWR96 series sensor is an industrial lightweight force torque sensor that measures on 6 axes.,features in high strength and large capacity from 100N to 2000N . this torque sensor with digital output and Light weight also contributes to reducing the load on the robot.

The ZHKY2050 is a compact non-contact type torque sensor ideal for low torque applications with maximum of only 5N·m. The ZHKY2050 can still handle up to 8000RPM so it is for systems that require high speed.

The ZHKY2050A is a series of non-contact type torque sensors ideal for testing and measurement of industrial rotating machines. Designed to be small and rugged it can easily be installed in a variety of industrial applications. The sensor can output torque and speed for measuring power exerted by the attached rotating machine.

The ZHKY2050B is a compact slip ring type torque sensor ideal for high torque applications. This sensor is designed to be rugged so that it can handle a maximum of up to 500N·m at 8000RPM.

The ZHKY2051 is a compact high capacity slip ring type torque sensor ideal for a wide range of torque applications. Its size is larger than ZHKY2050 torque sensors, however, it offers a broad capacity range in the same form factor with mounting plate. This sensor is built with a stainless steel shaft and aluminum body and so that it can handle a maximum of up to 500N·m at 8000RPM.

ZHKY2051은 다양한 토크 어플리케이션에 적합한 소형 고용량 슬립링 타입 토크 센서입니다. ZHKY2050 토크 센서보다 크기가 크지만, 장착 플레이트를 포함하여 동일한 폼팩터에서 광범위한 용량 범위를 제공합니다. 이 센서는 스테인리스 스틸 샤프트와 알루미늄 바디로 제작되어 8000RPM에서 최대 500N·m의 토크를 견딜 수 있습니다.

The ZHKY901 is a rugged non-contact type torque sensor ideal for high torque applications with maximum of 300kN·m. The ZHKY901 is built with a stainless steel shaft and an aluminum body that can high capacities at high speeds of up to 8000RPM.

ZHKY901은 최대 300kN·m의 고토크 어플리케이션에 적합한 견고한 비접촉식 토크 센서입니다. ZHKY901은 스테인리스 스틸 샤프트와 알루미늄 바디로 제작되어 최대 8000RPM의 고속에서도 높은 성능을 발휘합니다.

1、Static torque sensor is a kind of sensor used to measure the torque of a stationary or slowly rotating object.
2、The flange mounted sensor is connected with a load transfer device, which can output voltage or current signals.
3、Static torque sensors can be used in various industrial fields, such as electric screwdrivers, torque wrenches, wind turbines and so on.
4、Small size, light weight and convenient installation and use.
5、 High detection accuracy, good stability and strong anti-interference ability.

1、Static torque sensor is a kind of sensor used to measure the torque of a stationary or slowly rotating object.
2、The flange mounted sensor is connected with a load transfer device, which can output voltage or current signals.
3、Static torque sensors can be used in various industrial fields, such as electric screwdrivers, torque wrenches, wind turbines and so on.
4、Small size, light weight and convenient installation and use.
5、 High detection accuracy, good stability and strong anti-interference ability.

1、Static torque sensor is a kind of sensor used to measure the torque of a stationary or slowly rotating object.
2、The flange mounted sensor is connected with a load transfer device, which can output voltage or current signals.
3、It is used for static discontinuous rotation, non-standard customization, anti-interference signal stability, and is widely used in static torque testing systems such as testing machines, torque wrenches, steering gears, electric actuators, valves, transmissions, and hydraulic pressure.
4、Small size, light weight and convenient installation and use.
5、 High detection accuracy, good stability and strong anti-interference ability.

1、Static torque sensor is a kind of sensor used to measure the torque of a stationary or slowly rotating object.
2、The flange mounted sensor is connected with a load transfer device, which can output voltage or current signals.
3、It is used for static discontinuous rotation, non-standard customization, anti-interference signal stability, and is widely used in static torque testing systems such as testing machines, torque wrenches, steering gears, electric actuators, valves, transmissions, and hydraulic pressure.
4、Small size, light weight and convenient installation and use.
5、 High detection accuracy, good stability and strong anti-interference ability.

ZMDN is a high-precision rotarting torque sensor. The max rotating speed that the sensor can accept is 3000rpm. The output signal of ZMDN is from 1.0-1.5mv/v. Analog transmitter 4-20mA, 0-5V, 0-10V is optional.

Stainless steel body

Flange to square torque sensor ZMNJF is a non-rotating type torque transducer that converts a torsional mechanical input into an electrical output signal. ZMNJF can be used in both clockwise and counterclockwise direction ranging from 1Nm up to 500Nm. The measuring range and flange/square size can be customized to meet customer’s requirements.

Nickel plated alloy steel

The ZMNJ is a non-rotating type torque transducer that converts a torsional mechanical input into an electrical output signal. The ZMNJ can be used in both clockwise and counterclockwise direction ranging from 1Nm up to 200Nm. The sensor is used in static and non-rotating torsion measure applications.

Nickel plated alloy steel

The ZMNJF2 is a non-rotating type torque transducer that converts a torsional mechanical input into an electrical output signal. The ZMNJF2 can be used in both clockwise and counterclockwise direction ranging from 1000Nm up to 5000Nm. The sensor is used in static and non-rotating torsion measure applications.

Nickel plated alloy steel