DAYSENSOR / DYN-200 / Датчик крутящего момента

For static, non-continuous torque measurement

5-500N.M IP66 Dynamic Torque Sensor Force Torque Sensor FA603 is a model of our brand FIBOS FA6-Series, Dynamic Torque Sensor Force Torque Sensor FA603 can be used to measure dynamic torque force ranges from 5N.m,10N.m,20N.m,50N.m,100N.m,200N.m and 500N.m capacity, its Rated output range is 1.0~1.5mV/V, its Zero Balance range is ±0.01mV/V.

The ZMNJ is a non-rotating type torque transducer that converts a torsional mechanical input into an electrical output signal. The ZMNJ can be used in both clockwise and counterclockwise direction ranging from 1Nm up to 200Nm. The sensor is used in static and non-rotating torsion measure applications.

Nickel plated alloy steel

10,20,50,100,200,500t Or Customized Dynamic Torque Sensor Force Torque Sensor FA607A belongs to FA607 which is in Dynamic Torque Sensor Force Torque Sensor category of our brand FIBOS FA6-Series, Dynamic Torque Sensor Force Torque Sensor FA607 its Creep(30min),Non-linearity and Hysteresis all ≤0.15%F.S. or can be customized, its Repeatability ≤0.13%F.S. or customized.

For static, non-continuous torque measurement

Suitable for dynamic, bearing, torque wrench and other testers

The ZHKY901 is a rugged non-contact type torque sensor ideal for high torque applications with maximum of 300kN·m. The ZHKY901 is built with a stainless steel shaft and an aluminum body that can high capacities at high speeds of up to 8000RPM.

ZHKY901은 최대 300kN·m의 고토크 어플리케이션에 적합한 견고한 비접촉식 토크 센서입니다. ZHKY901은 스테인리스 스틸 샤프트와 알루미늄 바디로 제작되어 최대 8000RPM의 고속에서도 높은 성능을 발휘합니다.

The ZMZNJ is dual range shaft torque sensor. The torque sensor measures shaft-shaft type connection, measuring torsion by strain gages. There are both analog and digital output signals available for evaluation. The stainless steel construction is optional.

Nickel plated alloy steel

1,2,3,5,10,20,30,50,100,200Nm Or Customized Dynamic Torque Sensor FA607B is a model of our brand FIBOS FA6-Series, FA607B belongs to FA607 which is from Torque Force Sensor, it can be used to measure Torque Force 1N.m, 2N.m, 3N.m, 5N.m, 10N.m, 20N.m, 30N.m, 50N.m, 100N.m, 200N.m or customized capacity, its Creep(30min) and Repeatability both same ≤0.1%F.S. or can be customized, its Non-linearity and Hysteresis both same ≤0.2%F.S. or also can be customized.

The ZHKY2051 is a compact high capacity slip ring type torque sensor ideal for a wide range of torque applications. Its size is larger than ZHKY2050 torque sensors, however, it offers a broad capacity range in the same form factor with mounting plate. This sensor is built with a stainless steel shaft and aluminum body and so that it can handle a maximum of up to 500N·m at 8000RPM.

ZHKY2051은 다양한 토크 어플리케이션에 적합한 소형 고용량 슬립링 타입 토크 센서입니다. ZHKY2050 토크 센서보다 크기가 크지만, 장착 플레이트를 포함하여 동일한 폼팩터에서 광범위한 용량 범위를 제공합니다. 이 센서는 스테인리스 스틸 샤프트와 알루미늄 바디로 제작되어 8000RPM에서 최대 500N·m의 토크를 견딜 수 있습니다.

This sensor is suitable for most domestic and foreign cooperative robots. It is an embedded high-precision six-axis force sensor that our company hot sells. It uses silicon strain gauge, based on the principle of strain electrical measurement to convert the load into voltage signal, combined with six axis joint calibration technology to make the product achieve higher accuracy and precision. It is widely used in 3C testing, medical testing, drag teaching, automobile testing, and other fields.

The ZMNJF2 is a non-rotating type torque transducer that converts a torsional mechanical input into an electrical output signal. The ZMNJF2 can be used in both clockwise and counterclockwise direction ranging from 1000Nm up to 5000Nm. The sensor is used in static and non-rotating torsion measure applications.

Nickel plated alloy steel